BPJZR - 3254XX, LIQUID SATIN STAINLESS STEEL/CLEANE
- MSDS: BPJZR
- Manufacturer: NATIONAL SANITARY SUPPLY CO
- Product Name: 3254XX, LIQUID SATIN STAINLESS STEEL/CLEANE
- National Stock Number: 7930-00N031871
Product Identification
Product ID:3254XX, LIQUID SATIN STAINLESS STEEL/CLEANE
MSDS Date:11/25/1985
FSC:7930
NIIN:00N031871
MSDS Number: BPJZR
Responsible Party
LOS ANGELES, CA 90061
US
Emergency Phone: 213-327-6795
Info Phone: 213-770-1970
Cage: 5R332
Contractor
Telephone: 713-928-5171
Cage: 5R332
Ingredients
0.25-0.50
Fraction By Weight: SEE ING
KEROSENE (PETROLEUM), HYDROTREATED; (PETROLEUM DISTILLATES)
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 47-53%
ACGIH TLV: 100 PPM (MFR)
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
Fraction By Weight: 47-53%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3;10 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:PRODUCT IS NOT EXPECTED TO BE AN
EYE IRRITANT. SKIN:MAY CAUSE IRRITATION ON PROLONGED OR FREQUENTLY
REPEATED CONTACT. PROLONGED OR PREQUENTLY REPEATED SKIN CONTACT MAY
CAUSE SKIN TO BECOME DRY OR CRACKED FROM DEFATTING ACTION OF
PRODUCT. INHAL:PROLONGED EXPOSURE TO HIGH VAPOR CONCENTRATIONS OF
(EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PRODUCT MAY CAUSE SIGNS AND SYMPTOMS
OF HEADACHE OR DIZZINESS. AFFECTED PERSONS NORMALLY EXPERIENCE
COMPLETE RECOVERY WHEN REMOVED FROM EXPOSURE AREA. INGEST:PRODUCT
IS NOT EXPECTED TO BE TOX IC BY INGESTION. HOWEVER, IF MATERIAL IS
SWALLOWED AND ASPIRATED INTO LUNGS, CHEMICAL PNEUMONITIS MAY
RESULT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH WITH PLENTY OF FRESH WATER FOR AT LEAST 15
MINUTES. IF IRRITATION PERSISTS GET MD ATTENTION. SKIN:WASH WITH
SOAP AND WATER. USE A GOOD CREAM AFTER WASHING AND THOROUGHLY
DRYING SKIN. WASH C ONTAMINATED CLOTHING BEFORE REUSE. INHAL:MOVE
PERSON TO AN UNCONTAMINATED AREA AND GET MD ATTENTION. INGEST:DO
NOT INDUCE VOMITING. GET MD ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point Method:TOC
Flash Point:168F,76C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT ENTER ENCLOSED/CONFINED FIRE SPACE
WITH OUT EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:ELIMINATE ALL OPEN FLAMES IN VICINITY OF
SPILL. DIKE AREA TO CONTAIN SPILL. CLEAN UP AREA BY MOPPING UP
ABSORB MATL. A FIRE/VAP HAZ MAY EXIST SINCE THIS TYPE OF CLEAN UP
MATL WILL ONLY ABSORB LIQ; IT WILL NOT ABSORB VAPS. PLACE ALL
CONTAM (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:FOLLOW LABEL DIRECTIONS. STORE IN COOL
DRY PLACE. REPLACE CAP AFTER USE. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC:MATERIAL IN CLOSED CONTAINERS FOR DISPOSAL. AVOID
CONTAMINATION OF GROUND AND SURFACE WATERS. DO NOT FLUSH TO SEWER.
IF SPILL OCCURS INDOORS, TURN OFF AIR CONDITIONING AND/OR HEATING
SYSTEM , TO PREVENT VAPORS FROM CONTAMINATING ENTIRE BUILDING.
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:>480F,>249C
Vapor Pres:<1 @ 77F
Vapor Density:<5
Spec Gravity:0.86 (H2O = 1)
Evaporation Rate & Reference:<0.03 (BU AC = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR WITH SWEET ODOR.
Percent Volatiles by Volume:99
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:DO NOT MIX THIS PRODUCT WITH OTHER
CHEMICALS.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CO2 & H2O
VAPORS. INCOMPLETE COMBUSTION MAY PRODUCE CO.
Disposal
Waste Disposal Methods:RECOVERED LIQ MAY BE SENT TO A LISCENCED INCIN
FACILITY. CONTAM MATL MUST BE DISP OF IN A PERMITTED WASTE
MANAGEMENT FACILITY. CONSULT LOC, STATE & FED AUTHORITIES FOR
APPRVD PROCEDURES. CONTR DISP:DI SP OF ACCORDING TO LOC, STATE, &
FED REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.